1/2″ Shank Ultimate Router Bit Set

This 2" wide surfacing bit can be used on a CNC router table or a handheld router to flatten and re-surface spoilboards, wood slabs, live edge slabs and epoxy pours. See tab below for Speeds & Feeds info.

• AstraHP Coated
• Shank: 1/2"
• Cut Diameter: 2"
• Cut Length: 1/2"
• Overall Length: 2-1/2"
• Made In USA

• AstraHP Coated
• 1/2" Shank
• Actual cut diameter: 23/32" (18.2mm)
• 1" Cut Length
• 2-1/2" Overall Length
• Also available in 1/4" shank
• Recommended RPM: 12,000-14,000 (max 18,000)
• Made In USA

1/2" shank, 2" large diameter, this chamfer bit fits most routers with 1/2" collet. Use for chamfered edges or miter joints.

• AstraHP Coated
• 1/2" Shank
• 3/4" Cut Height
• 1-1/16" Cut Length
• 2" Large Diameter
• Bearing Part#: B3
• Recommended RPM: 13,000-15,000
• Made In USA

1/2" spiral up cut router bits are ideal for deep mortises and fast pocket cuts, but can be used with router or CNC. 

• AstraHP Coated
• Solid Carbide
• 1/2" Cutting Diameter
• 2" Length of Cut
• 1/2" Shank
• 4" Overall Tool Length
• Available in 1" Length of cut
• Made in USA

#section_1605661147 { padding-top: 45px; padding-bottom: 45px; } @media (min-width:550px) { #section_1605661147 { padding-top: 65px; padding-bottom: 65px; } } @media (min-width:850px) { #section_1605661147 { padding-top: 2px; padding-bottom: 2px; } }

Round-over router bits are used to round the edges on wood, plastic and composites.

• AstraHP Coated
• Shank Diameter: 1/2"
• Cut Radius: 1/8"
• Cutting Length: 1/2"
• Large Diameter: 3/4"
• Bearing Part#: B3
• Beading bearing part# B2
• Bearing Inside Diameter: 3/16"
• Recommended RPM: 16,000
• Available in 1/4" Shank
• Made In USA

Whiteside Rabbeting bits are designed to cut a shoulder on the top edge of your material. Increase the versatility of your rabbeting router bits by changing the bearing size to vary your cutting depth.

• AstraHP Coated
• Shank Diameter: 1/2"
• Cutting Length: 1/2"
• Cutting Depth: 3/8" (w/ included B3 Bearing)
• Large Diameter: 1-1/4"
• Bearing Inside Diameter: 3/16"
• Recommended RPM: 14,000
• Made In USA
• See W-BB501 for bearing conversion kit.

1/2" up/down Compression bit works with on a handheld router, in a router table or on your CNC Router.
*Note that the overall length is 4", on most standard 1/2" routers, this bit protrudes past the router plate about 1/2".

• AstraHP Coated
• Solid Carbide
• Tip diameter: 1/2"
• Length of cut: 2"
• Spiral Change: 0.375"
• Overall Tool length: 4"
• Also available in 1-1/2" LOC  and 1" LOC
• Made in USA

#section_452193202 { padding-top: 45px; padding-bottom: 45px; } @media (min-width:550px) { #section_452193202 { padding-top: 65px; padding-bottom: 65px; } } @media (min-width:850px) { #section_452193202 { padding-top: 2px; padding-bottom: 2px; } }

Downcut spiral bits produce the cleanest cut on the upper edge of your workpiece. Excellent choice for shallow mortises and pockets, but can be used for pocketing as long as there is dust collection in place.

• AstraHP Coated
• Solid Carbide
• Tip diameter: 1/2"
• Length of cut: 1"
• Overall length: 3"
• Made In USA

Our newest addition to our spiral flush trim router bits, the 1/2 inch compression flush trim router bit will be your go-to for all your flush trim needs! 

• AstraHP Coated
• Solid Carbide
• 1/2" Cutting Diameter
• 1-1/2" Length of Cut
• 1/2" Shank
• Spiral Change: 0.375″
• 4" Overall Length
• Recommended RPM: 16,000-18,000
• Also available in 3/8" cut diameter
• Replaces UDFT5152
• Made in USA

#section_1648812645 { padding-top: 45px; padding-bottom: 45px; } @media (min-width:550px) { #section_1648812645 { padding-top: 65px; padding-bottom: 65px; } } @media (min-width:850px) { #section_1648812645 { padding-top: 2px; padding-bottom: 2px; } }