*AstraHP Coated* Bits&Bits 540-CM375FT – 3/8″ Compression Flush Trim Router Bit 1/2″ Shank
$119.99
3/8″ compression flush trim router bit gives you tighter trim radius with the added strength of 1/2″ shank. Perfect for routing with templates on a router table.
- AstraHP Coated
- Solid Carbide3/8″ Cutting Diameter
- 1-1/2″ Length of Cut
- 1/2″ Shank
- Spiral Change: 0.375″
- 4″ Overall Length
- Recommended RPM:Â 16,000-18,000
- Also available with 1/2″ cut diameter
- Replacement bearing: B2 (available here)
- Made in USA
In stock
| Weight | 0.345 lbs |
|---|---|
| Brand | Bits & Bits |
| Shank | 1/2" |
| Cut Diameter | 3/8" (.375") |
| Cut Length | 1-1/2" |
| Cut Style | Compression |
| Overall Length | 4" |
Speeds & Feeds
This data serves as a general guidance only.
Soft/Hard Woods/ Plywood – (Spindle Speed- RPM: 18K)Â – (Feed Rate – IPM : 150-200″) – (Ramp Down: 75-125″) – (Chip Load per tooth – .0057″)
MDF / Laminate / Melamine – (Spindle Speed- RPM: 18K)Â – (Feed Rate – IPM : 250-300″)Â – (Ramp Down: 150-175″) – (Chip Load per tooth – .0096″)
Be the first to review “*AstraHP Coated* Bits&Bits 540-CM375FT – 3/8″ Compression Flush Trim Router Bit 1/2″ Shank”
Related products
1/4" Shank Spiral Bits
*AstraHP Coated* Bits&Bits 425-SRB062 – 1/16″ Ball Nose Up-Cut Spiral Bit – 1/4″ Shank
$36.99
Spiral Upcut Router Bits
*AstraHP Coated* Bits&Bits 425-SRF125LR – 1/8″ Long Reach Up-Cut Spiral Bit – 1/4″ Shank
$35.99
1/4" Shank Spiral Bits
*AstraHP Coated* Bits&Bits 425-DNC062 – 1/16″ Down-Cut Spiral Bit – 1/4″ Shank
$36.99
Spiral Upcut Router Bits
*AstraHP Coated* Bits&Bits 425-SRF062LR – 1/16″ Long Reach Up-Cut Spiral Bit – 1/4″ Shank
$38.99
Reviews
There are no reviews yet.