Weight | 0.08 lbs |
---|---|
Brand | Bits & Bits |
Shank | 1/4" |
Cut Diameter | 1/4" (.25") |
Cut Length | 1" |
Cut Style | Compression |
*AstraHP Coated* Bits&Bits 1/4″ Spiral Compression Flush Trim Router Bit
AU$117.49
Perfect for cordless trim routers and router tables, our 1/4″ Compression Flush Trim Router Bit is built to tackle tight curves and intricate profiles with ease. For optimal performance, we recommend rough-cutting within 1/8″ to 3/16″ of your finished surface. If you’re removing more material than that, consider using an up-cut flush trim bit to achieve the best results.
- AstraHP Coated
- Solid Carbide
- Compression Cut
- Shank: 1/4″
- Cut Length: 1″
- Overall Length: 3″
- Double Bearings
- Made In USA
- Max RPM – 18,000
** NOTE: 1/4″ flush trim bits are designed for trim routers and smaller cordless routers, giving you control and precision. For your safety and to protect the bit, avoid using it in larger corded routers with 2+ horsepower, as their torque can cause damage.
In stock
Frank DeSomer (verified owner) –
Like the other bits’ I’ve used from Bits&Bits, this is a tight cutting smooth finish cutter. THe Astra coating even further extends the superior quality of this bad boy. I needed something to get in to the tight radius and this is perfect.
Mj –
Frank, Thanks for the review! Glad to hear that the tighter radius of the 1/4″ bit worked out well for you.
Kiaaina Wong (verified owner) –
Fantastic bit as i use to trim the excess off of my 1/4″hardwood edge banding I use on all my cabinetry. Leave a smooth finish and makes for easy final sanding.
Mj –
Thanks for the review! We believe a good bit should make the next processes easier, i.e., sanding. Because, let’s face it, who likes sanding???
jack (verified owner) –
I purchased one and the locking collar does not have a set screw nor a threaded hole for one. The collar and bearings fly off when I attempted to use it.
Mj –
Jack, Thanks for bringing this to our attention! The 1/4 flush trim bits have a press-on collar, so there is no set screw. We are sending a replacement bit!
Blair Power (verified owner) –
Love this bit. Worth every penny. I was having a frustrating time with a traditional vertical flush trim bit (lots of tearout!) and this bit solved my issue. It has let me really speed up my template trimming and I wish I’d purchased sooner
B. Austin –
When my Rockler pattern bit failed , in the middle of 1st use. I decided to upgrade with to this Astra Coated 1/4″ Spiral Compression Flush Trim bit and is definitely worth the investment. Gives a clean cut and work flawlessly.
Thanks you B&B for a quality product at a fair price.
Keith Cilento (verified owner) –
Great but, powerful and smooth. It was everything I was hoping it would be.
Tasia (verified owner) –
I use the astra coated 1/4” spiral flush trim compression bit for flush trimming the edge of Cornhole boards and cutting out the holes. This bit makes cutting holes a breeze and takes no time at all tearing through dense plywood!
Duane Lonneman (verified owner) –
This is my first purchase and so far I am pleased with the website, price, service, delivery, and most important, the bit works very well. I plan to order more tools in the future.
Jason Fast (verified owner) –
I do a lot of pattern routing with wenge & hard maple, so far the performance is comparable to bits at half the price. The durability is yet to be seen but I have high expectations for the Astra coating
Mj –
Thanks for the review Jason!
Tim Lumberg (verified owner) –
Wish I would’ve gotten this sooner. Replaces 2 different template bits and gets through my template routing in 1 pass vs 3.
Ronald (verified owner) –
I used this to trim some 1/2 inch white oak flush to a pattern and it left a glass smooth finish.
Ryan (verified owner) –
Don’t look any further. Buy now. Left no tear out and virtually no burning on the end grain.
Mj –
Thanks for the review Ryan, we’re glad these 1/4 flush trim bits work well for you!
Larasea (verified owner) –
Great customer service. Agent helped me figure out the right bits for my project. Project came out perfect.
Mj –
Thanks for the review, glad we were able to help you out!
staceylewisdesigns (verified owner) –
This is my favorite of all the bits I have from Bits and Bits. I make furniture pieces that are usually small in stature and lately by request, end grain cutting boards, charcuterie and wine holders. This bit allows easy access and what looks like a flawless cut. Some of the pieces I make simply wouldn’t be possible without this bit due to some of the small areas. I couldn’t be more pleased. Highly recommended!
Mj –
Thanks for the review! We work hard to get these bits just right, glad it’s working out for you!