Half Round Engraving Cutter – 1/4 x 6-1/2″ w/ Knob

$24.00

Engrave and mark a wide range of materials such as steel, stainless steel, aluminum, wood, resin, plastics, acrylics and soft metals such as brass and copper.

Solid Carbide
Shank Diameter: .25″ (1/4″)
Tool Length: 6-1/2″ inches
Includes Cutter Knob
Made In USA

Choose Angle and Tip Size:

Engraving Tip Size: No selection

Engraving Angle: No selection

Engraving Material Types: No selection

Clear

SKU: 465-HFA Category: 1/4 x 6-1/2" Engraving Cutters

Solid Carbide engraving cutter, ideal for engraving brass, aluminum, and stainless steel. The tip size will determine the line width when it comes into contact with the material you are engraving. For example when engraving 1/8″ tall letters use a .010 or .015 tip; for 1/4″ tall letters use a .020 or .030 tip.

Engrave and mark a wide range of materials such as steel, stainless steel, aluminum, wood, resin, plastics, acrylics and soft metals such as brass and copper. Industry standards recommend that you use an 80 degree included for engraving stainless and most metals and 60 degree included for engraving plastics and or brass.

What are Engraving V-Bits?

V-bits produce a “V” shaped pass and are used for engraving, particularly for making signs.

They come in a range of angles and tip diameter’s. The small angles and tips provided on these V-shaped engraving bits produce narrow cuts and small, delicate engraving of lettering and lines.

Made in the USA by Bits & Bits.

Weight	0.3 lbs
Brand	Bits & Bits
Engraving Tip Size	.003 Tip, .005 Tip, .007 Tip, .008 Tip, .010 Tip, .015 Tip, .020 Tip, .025 Tip, .030 Tip, .035 Tip, .040 Tip, .050 Tip, .060 Tip, .070 Tip, .080 Tip, .090 Tip, .100 Tip, .125 Tip, .150 Tip
Engraving Angle	40 Included, 50 Included, 60 Included, 70 Included, 80 Included, 90 Included
Engraving Material Types	BAL (brass/alum), FLX (plastic), SSS (stainless steel)