Here is a 1/8 x 1-1/2" tapered flat end mill with a .005 inch cutting tip (0.127mm). This end mill has a 30 degree included angle, 15 degrees per side, with a .200 inch cut length (5.10mm).
Solid Carbide - Shank Diameter: 1/8 (3.175mm) - Tool Length: 1-1/2 inches (38mm)
*These tools are coated with a ALTiN like coating that is specially made for these tools, Its a very high quality coating that has out performed all other coatings we have tested.*