Engraving Tool 70 deg 1/4 x 2"

Engraving Tool 70 deg 1/4 x 2"

Starting at: $16.50

Make Selection

 
 

Part#: 420-HF70

Product Details

70 Degree Carbide Engraving Tool - 1/4 x 2

All of our half round engraving tools have a ½” split length.

This is a solid carbide single lip engraving tool with 70 degree included angle (35 degrees per side). Very popular for engraving most plastics, brass and aluminum.

*Remember to choose a cutting tip from the box below. The larger the tip size the stronger the tool will be.

Included angle = 70 degrees
Side angle = 35 degrees
Shank Diameter = 1/4  (6.35mm)
Tool Length =  2 inches  (50mm)

Copyright © 2018 Bits & Bits.