Engraving Tool With 60 deg Included Angle
This is a solid carbide single lip engraving tool with 60 degree included angle (30 degrees per side). This type of engraving tool is very popular for engraving most plastics.
The Photo above shows a 60°inc angle
All of our half round engraving tools have a 1/2" split length. *Remember to choose a cutting tip from the box below.
Included angle = 60 degrees
Side angle = 30 degrees
Shank Diameter = 1/4 (6.35mm)
Tool Length = 2 inches (50mm)