*Astra Coated* Engraving Router V-Bit 45 deg 1/4 x 2-1/2"

*Astra Coated* Engraving Router V-Bit 45 deg 1/4 x 2-1/2"

$22.00


Part#: 425-CR45

Product Details

45 deg 1/4 x 2-1/2 Carbide Engraving Router Bit

This is a solid carbide engraving router bit with 45 degree included angle (22.5 degrees per side). Our 45 deg 1/4 x 2-1/2 engraving tool is a very popular choice for engraving small detail on wood or plastic and even aluminum. It will cut a 45 degree angle into your material. These tools are coated with a proprietary high performance *Astra coating* that allows higher speed & feed rates as well as extended tool life & increased lubricity in abrasive material. Made in the USA

Included angle = 45 degrees
Side angle = 22.5 degrees
Shank Diameter = 1/4  (6.35mm)

Tool Length =  2-1/2 inches 

This data serves as a general guidance only.
Soft Woods/ Hard Woods/Plastics/Aluminum
Spindle Speed- RPM: 16-18K
Feed Rate - IPM : 40-110" 

Copyright © 2019 Bits & Bits.