1/4 x 7" Engraving Tools

These are for top loading engraving machines where the brass engraving cutter knob screws into the top of the spindle. It is important that you choose a tip size when placing your order. The tip of the cutter has various clearance angles and will help remove the chips while you engrave. The taller the letters or characters the larger the tip size should be. For example; for 1/4" tall letters you should use a .020 or .030 tip but for 1/8" tall letters a .010 or .015 tip would be better. All of our top loading engraving tools come with the brass knob. 

Product Image Item Name- Price
Half Round 1/4 x 7"

Half Round 1/4 x 7"

Solid micrograin carbide - Shank Diameter = 1/4  (6.35mm) - Tool Length =  7 inches  (177mm) The 'Half-Round' is our most...
$24.45

... more info

Profiler Cutter 1/4 x 7 - 30 degree

Profiler Cutter 1/4 x 7 - 30 degree

Solid micrograin carbide - Shank Diameter = 1/4" x  Tool Length =  7 inches  The 'Profiler' has a sharp angle...
$26.50

... more info

QTR Round 1/4 x 7"

QTR Round 1/4 x 7"

Solid micrograin carbide - Shank Diameter = 1/4"  x   Tool Length =  7 inches  The 'Quarter-Round' is...
$28.45

... more info

Parallel Cutter 1/4 x 7"

Parallel Cutter 1/4 x 7"

Solid micrograin carbide - Shank Diameter = 1/4  (6.35mm) - Tool Length =  7 inches  (177mm) The 'Parallel' cuts with a...
$24.45

... more info

Cutter/Beveler 1/4 x 7"

Cutter/Beveler 1/4 x 7"

1/4 x 7 Cutter and Beveler Engraving Cutter Made of solid micrograin carbide, the 'Cutter/Beveler' is two engraving tools in one. The...
$31.00

... more info

Beveler 1/4 x 7 x 90 degree

Beveler 1/4 x 7 x 90 degree

Solid micrograin carbide - Shank Diameter = 1/4"   -   Tool Length =  7 inches  The 'Beveler' or...
$24.45

... more info

Carbide Burnisher 1/4 x 7"

Carbide Burnisher 1/4 x 7"

Solid micrograin carbide - Shank Diameter = 1/4  -  Tool Length =  7 inches  The 'Burnisher' is used on coated...
$26.50

... more info

Copyright © 2019 Bits & Bits.