Shopping Cart:0 items
Your cart is empty
MENU
Cad Cam Milling Tools
Miniature End Mills
Engraving Tools
Plotter Blades

1/4 x 6-1/2" Cutters

1/4 x 6-1/2" Screw In Engraving Cutters

These are for top loading engraving machines where the cutter screws into the spindle from the top.It is important that you choose a tip size when placing your order. The tip of the cutter has various clearance angles and will help remove the chips while you engrave. The taller the letters or characters the larger the tip size should be. For example; for 1/4" tall letters you should use a .020 or .030 tip but for 1/8" tall letters a .010 or .015 tip would be better. All of our top loading engraving tools come with the brass knob.

 

  • Cutter Knob Wrench
    Cutter Knob Wrench
    The cutter knob wrench is for the set screw in the brass knob that is on the top loading engraving cutter. The set screws have a 4 spline head and need a special wrench to tighten or loosen. The cutter knob wrench is for the set screw in the brass knob that is on the to...
  • Half Round Cutter - 1/4 x 6-1/2
    Half Round Cutter - 1/4 x 6-1/2
    Solid micrograin carbide - Shank Diameter = 1/4  (6.35mm) - Tool Length =  6-1/2 inches  (165mm) The 'Half-Round' is our most popular cutter. Use it for engraving plastic, brass & aluminum, metal or stainless. All tip sizes available. These tools come with a cutter knob. Industry standards recommend that you use: 80 degree included for engraving stainless and... Solid micrograin carbide - Shank Diameter = 1/4  (6.35mm) - Tool Length =&...
  • Profiler Cutter - 1/4 x 6-1/2 - 30 degree
    Profiler Cutter - 1/4 x 6-1/2 - 30 degree
    1/4 x 6-1/2 Profiler Engraving Tool Made of solid micrograin carbide, the 'Profiler' has a sharp angle that works well for doing cut-outs. This engraving cutter is very popular for engraving letters that run close together, and cuts a slight 'V' groove in the part. Can also be used for ADA. All tip sizes available. These tools come with a cutter knob. Shank Diameter = 1/4 ... 1/4 x 6-1/2 Profiler Engraving Tool Made of solid micrograin carbide, the 'P...
  • Quarter Round 1/4 x 6-1/2
    Quarter Round 1/4 x 6-1/2
    Made of solid micrograin carbide - Shank Diameter = 1/4  (6.35mm) - Tool Length =  6-1/2 inches  (165mm)  The 'Quarter-Round' is designed for better chip removal. This 1/4 x 6-1/2 engraving tool works well on stainless, acrylic and profiling soft material and to cut out ADA applique. Industry standards recommend that you use: 80 degree included for engraving... Made of solid micrograin carbide - Shank Diameter = 1/4  (6.35mm) - Tool L...
  • Beveler 1/4 x 6-1/2 - 90 degree
    Beveler 1/4 x 6-1/2 - 90 degree
    Solid micrograin carbide - Shank Diameter = 1/4  (6.35mm) - Tool Length =  6-1/2 inches  (165mm) The 'Beveler' or border cutter is used to cut a shape on the edge of your material. The standard angle is 45 degree per side (90 degree included). You can order any angle at no extra charge. These tools come with a cutter knob. Solid micrograin carbide - Shank Diameter = 1/4  (6.35mm) - Tool Length =&...
  • Parallel Cutter 1/4 x 6-1/2
    Parallel Cutter 1/4 x 6-1/2
    Solid micrograin carbide - Shank Diameter = 1/4  (6.35mm) - Tool Length =  6-1/2 inches  (165mm) The 'Parallel' cuts with a straight edge. The sides of th groove will be parallel, unlike the half-round which cuts a 'V' groove. Tip size standard to .060. These tools come with a cutter knob. $5.00 more for tips smaller than .060. We do not offer tip sizes smaller... Solid micrograin carbide - Shank Diameter = 1/4  (6.35mm) - Tool Length =&...
  • Cutter/Beveler 1/4 x 6-1/2
    Cutter/Beveler 1/4 x 6-1/2
    Solid micrograin carbide - Shank Diameter = 1/4  (6.35mm) - Tool Length =  6-1/2 inches  (165mm) The 'Cutter/Beveler' is two tools in one. The end has a .060 parallel to cut through the material and the angle produces a 45 degree beveled angle. Specify 1/8 or 1/16 material. These tools come with a cutter knob. Solid micrograin carbide - Shank Diameter = 1/4  (6.35mm) - Tool Length =&...
  • Carbide Burnisher 1/4 x 6-1/2
    Carbide Burnisher 1/4 x 6-1/2
    Solid micrograin carbide - Shank Diameter = 1/4  (6.35mm) - Tool Length =  6-1/2 inches  (165mm) The 'Burnisher' is used on coated metals to remove the lacquer and bring out the 'undershine'. These tools come with a cutter knob. Solid micrograin carbide - Shank Diameter = 1/4  (6.35mm) - Tool Length =&...
  • 2FL SQ End Mill .0625
    2FL SQ End Mill .0625
    2 Flute End Mills are designed for milling or machining many materials such as aluminum, acrylic, plastic, wood. These tools come with a cutter knob. Shank Diameter - 1/4 x 6-1/2" Cutting Tip - .0625 Length of Cut - .250 (1/4) 2 Flute End Mills are designed for milling or machining many materials such as a...
  • 2FL SQ End Mill .125
    2FL SQ End Mill .125
    2 Flute End Mills are designed for milling or machining many materials such as aluminum, acrylic, plastic, wood. These tools come with a cutter knob. Shank Diameter : 1/4 x 6-1/2" Cutting Tip - .125 Length of Cut - .3750 (3/8) 2 Flute End Mills are designed for milling or machining many materials such as a...
  • (1/4 x 6 1/2) 1FL SQ End Mill .0625
    (1/4 x 6 1/2) 1FL SQ End Mill .0625
    Single Flute End Mills are designed for milling or machining materials such as acrylic, plastic, wood.The flute geometry allows for a smooth surface finish while allowing much faster chip removal when milling. These tools come with a cutter knob. Shank Diameter - 1/4 x 6-1/2" Cutting Tip - .0625 Length of Cut - .250 (1/4) Single Flute End Mills are designed for milling or machining materials such as a...
  • (1/4 x 6 1/2) 1FL SQ End Mill .125
    (1/4 x 6 1/2) 1FL SQ End Mill .125
    Single Flute End Mills are designed for milling or machining materials such as acrylic, plastic, wood.The flute geometry allows for a smooth surface finish while allowing much faster chip removal when milling. These tools come with a cutter knob. Shank Diameter - 1/4 x 6-1/2" Cutting Tip - .125 Length of Cut - .3750 (3/8) Single Flute End Mills are designed for milling or machining materials such as a...