Shopping Cart:0 items
Your cart is empty
MENU
Cad Cam Milling Tools
Miniature End Mills
Engraving Tools
Plotter Blades

1/8 x 1-1/2" Cutters

All of Bits & Bits engraving tools are solid micrograin carbide. For most metals, industry standards call for using a wider angle (80inc or 90inc) to give the tool strength. For softer materials like plastic, acrylic, wood, etc, the 50inc or 60inc half round is the most popular. Please specify a tip size when ordering. The Included angle is always 2x's the side angle

Tip sizes start at .003, .005 and up. The tip size will determine how wide your line is. For small character engraving choose a smaller tip size. For example when engraving 1/8" tall letters use a .010 or .015 tip, but for 1/4" tall letters use a .020 or .030 tip.

  • Engraving Tool 30 deg - 1/8 x 1-1/2"
    Engraving Tool 30 deg - 1/8 x 1-1/2"
    Please choose a tip size from the drop down box below. All tip sizes are in inches use the conversion chart on this page to see the size in millimeters. This engraving tool has a profile that will allow you to engrave or mill deeper into your part or mold without losing tomuch detail. It has a single lip cutting edge that cuts very clean. This tool is a good choice when fine detail is... Please choose a tip size from the drop down box below. All tip sizes are in inch...
  • Engraving Tool 40 deg - 1/8 x 1-1/2"
    Engraving Tool 40 deg - 1/8 x 1-1/2"
      Works well for engraving in plastic and other soft materials. Included angle = 40 degrees Side angle = 20 degrees Cut Length Inches = .1500 Cut Length MM = 4mm Shank Diameter = 1/8  (3.175mm) Tool Length =  1-1/2  (38mm) Please choose a tip size from the drop down box below. All tip sizes are in inches use the conversion chart on this page to see the size in millimeters.   Works well for engraving in plastic and other soft materials. Included an...
  • Engraving Tool 50 deg - 1/8 x 1-1/2"
    Engraving Tool 50 deg - 1/8 x 1-1/2"
    Solid carbide engraving cutter 1/8 x 1-1/2 with a 50 degree included angle (25 degrees per side). Great for engraving all types of plastics. Remember to choose a tip size. The tip size will determine how wide your line is, for small character engraving choose a smaller tip size. For example when engraving 1/8" tall letters use a .010 or .015 tip, but for 1/4" tall letters use a... Solid carbide engraving cutter 1/8 x 1-1/2 with a 50 degree included angle...
  • Engraving Tool 60 deg - 1/8 x 1-1/2"
    Engraving Tool 60 deg - 1/8 x 1-1/2"
    1/8 x 1-1/2" half round solid carbide engraving cutter with a 60 degree included angle (30 degrees per side). These tools are sometimes called V-Bits because they are shaped like the letter V. Great for engraving all types of plastics and most metals. For example when engraving 1/8" tall letters use a .010 or .015 tip, but for 1/4" tall letters use a .020 or .030 tip. ... 1/8 x 1-1/2" half round solid carbide engraving cutter with a 60 degr...
  • Engraving Tool 70 deg - 1/8 x 1-1/2"
    Engraving Tool 70 deg - 1/8 x 1-1/2"
    1/8 x 1-1/2" half round engraving cutter with a 70 degree included angle. Remember to choose a tip size. The tip size will determine the stroke width of the cutter. Great for engraving all types of plastics and metals. For example when engraving 1/8" tall letters use a .010 or .015 tip, but for 1/4" tall letters use a .020 or .030 tip. Included angle = 70 degrees Side angle... 1/8 x 1-1/2" half round engraving cutter with a 70 degree included an...
  • Engraving Tool 80 deg - 1/8 x 1-1/2"
    Engraving Tool 80 deg - 1/8 x 1-1/2"
    1/8 x 1-1/2" half round carbide engraving cutter with a 80 degree included angle (40 degrees per side). Remember to choose a tip size. The tip size will determine the line width when it comes into contact with the material you are engraving. Very popular for engraving brass, aluminum, and stainless steel. For example when engraving 1/8" tall letters use a .010 or .015 tip, but for... 1/8 x 1-1/2" half round carbide engraving cutter with a 80 degree included...
  • Engraving Tool 90 deg - 1/8 x 1-1/2"
    Engraving Tool 90 deg - 1/8 x 1-1/2"
    1/8 x 1-1/2" half round carbide engraving cutter with a 90 degree included angle (45 degrees per side). Remember to choose a tip size. The tip size will determine the line width when it comes into contact with the material you are engraving. Very popular for engraving brass, aluminum, and stainless steel. For example when engraving 1/8" tall letters use a .010 or .015 tip, but... 1/8 x 1-1/2" half round carbide engraving cutter with a 90 degre...
  • Engraving End Mill 30 deg - 2 flute .010
    Engraving End Mill 30 deg - 2 flute .010
    1/8 x 1-1/2" Engraving SQ End Mill with 2 flutes for engraving metal .010 tip This is a very strong tool, great for engraving hard materials such as stainless steel and metal. For best results make shallow passes and use air or flood coolant. 1/8 x 1-1/2" Engraving SQ End Mill with 2 flutes for engraving metal .010 ...