No products in the cart.
Recommended for:
*Astra Coated* Whiteside UDFT5152 1/2″ Compression Flush Trim Router Bit – 1-1/2″ Cut Length
$154.99
1/2″ spiral flush trim features a compression design that prevents fraying and chipout on the edges of your workpiece. Save time by sanding less.
- Astra Coated
- 1/2″ Shank
- Dual bearing pilot
- 1-1/2″ Cut Length
- 4-1/4″ Overall Length
In stock
These spiral bits offer state-of-the-art results in flush trimming. Made from solid carbide, each bit contains up cut and down cut flutes and is tipped with a double ball bearing guide. This flute design creates a compression cut that prevents fraying and splintering. Compression spirals will save you time and money on finishing your projects edges by reducing sanding time.
| Weight | .32 lbs |
|---|---|
| Brand | Whiteside |
| Shank | 1/2" |
| Cut Diameter | 1/2" (.5") |
| Cut Length | 1-1/2" |
| Cut Direction | Compression |
9 reviews for *Astra Coated* Whiteside UDFT5152 1/2″ Compression Flush Trim Router Bit – 1-1/2″ Cut Length
Add a review
Related products
$50.00 – $500.00
Out of stock
Jacob H. (verified owner) –
This bit is first class. After using it to template route yesterday, I am thoroughly impressed. I left between a 1/32 and 1/8 off the band saw and this little guy cut through all of it with no binding or kickback… even on end grain. Unbelievable quality and craftsmanship. Would highly recommend!
Sean (verified owner) –
Look no further, buy this bit. I’ve gone through several straight flush trim bits in the past and finally got tired of either sharpening the few that had a just enough carbide on them to last a bit longer or buying another bit to finish a job. I honestly didn’t think spending money on a “premium” bit would make that much of a difference, but I was wrong; this bit is amazing. Yes, it cuts wood and can template route like the inexpensive straight bits I’ve been using, but the finished cut is on another level. Typically when I used the straight bits I had to deal with lots of burning in cherry and maple pieces but this compression bit glides across the wood leaving behind a near finish-ready surface. I’m also impressed with the way it handles change in grain direction while routing (which was always a pain in the past eating up time for additional setups at the table) and I look forward to seeing how the Astra coating holds up over the next year. Bottom line, I should have bought this sooner.
Roland Rivard (verified owner) –
Cuts like butter. Any other bit would’ve added significantly to the time on my commissioned project, so it’s paid for itself.
Mike (verified owner) –
This bit saves time and money in the long run because the finished edge is perfect. It cuts smooth and doesn’t leave any burning, even on end grain. I should have added this to my arsenal years ago instead of buying the $40 flush trim bits that heat up, dull quickly, burn my work and can be dangerous if not going down grain. Save up longer and just buy this bit first, you’ll be glad you did.
Scott Hensen (verified owner) –
I bought this bit to replace a cheaper flush-trim bit and it does well at keeping the burning to a minimum (only used in on hard maple so far) but I was expecting a smoother finish. It leaves a small edge in the middle of the cut where the spiral direction changes. Maybe I just got one with a slight defect.
Mj –
Scott, Sorry to hear you’re not satisfied with the finish, it does sound like you might have gotten a defective tool, we’ll get it replaced for you!
AMG (verified owner) –
It’s great ! Wish I had talked to MJ a lot sooner !
Derek (verified owner) –
Once I got over the shock of having a piece of wood ripped to pieces, and figured out that I needed to prep the workpiece by pre-trimming close to the final shape, it worked beautifully. Although Im still pretty nervous about being close to such a powerful bit in a 3 HP router.
Matt Steuer (verified owner) –
This is by far the best trim bit I have used. I didn’t experience kick back and worked excellent on the end grain. Super impressed!
Gorden Eden (verified owner) –
Bits & Bits is an outstanding company and provides excellent customer service. It arrived in 2 days after I placed my order. The compression bit cuts extremely fast and clean. I will suggest that you reduce your router speed and let the bit do its job. It doesn’t heat up and burn your project. It’s worth spending a little more for a quality trim router bit.
Mj –
Thanks Gordon!