No products in the cart.
1/8 x 1-1/2” Solid Carbide Flat (Square) center cutting 3 Flute End Mill with a .125 (1/8″) cutting tip and a 5/16 length of cut.This tool features a 45 deg helix which makes it ideal for finishing due to its high shear angle and cutting aggressiveness. 3 Flute end mills are perfect for milling aluminum and other non-ferrous materials, they also tend to reduce vibrations during the milling operation. These tools are coated with our proprietary high performance coating which allows higher speed & feed rates as well as extended tool life & increased lubricity. Made in the USA
Tip Size Inches: .125 (1/8)
Tip Size MM: 3.175
Length of Cut/Inches: .750 (3/4)
Length of Cut/MM: 19.0
Shank Diameter: 1/8
Tool Length: 2 inches
This data serves as a general guidance only. Actual SFM and chip load data may vary.
Aluminum / Aluminum Alloy
SFM: 1200-2400 – Chip Load inch/z : 0.0010- 0.0012
High Strength Aluminum
SFM: 900-1400 – Chip Load inch/z: 0.0008-0.0009
| Weight | 0.15 lbs |
|---|---|
| Brand | Bits & Bits |
| Shank | 1/8" |
| Cut Diameter | 1/8" (.125") |
| Cut Length | 5/16" |
| Cut Direction | Up Cut |
Dylan Galyardt (verified owner) –
The bit works great. It took a lot of trial and error to get the correct feeds and speeds but when I did it worked great. It occasionally gets clogged with melted aluminum when I accidentally cut too deep, but the astra coating makes it really easy to remove.