MENU
Cad Cam Milling Tools
Miniature End Mills
Engraving Tools
Plotter Blades
Engraving Tool 45 deg 1/4 x 2\"

45 deg 1/4 x 2 Carbide Engraving Bit

This is a solid carbide single lip engraving tool with 45 degree included angle (22.5 degrees per side). Our 45 deg 1/4 x 2 engraving tool is a very popular choice for engraving small detail. It will cut a 45 degree angle into your material. *Remember to choose a cutting tip from the box below.

The larger the tip size the stronger the tool will be. All of our half round engraving tools have a 1/2" split length.

Included angle = 45 degrees
Side angle = 22.5 degrees
Shank Diameter = 1/4  (6.35mm)
Tool Length =  2 inches  (50mm)

Engraving Tool 45 deg 1/4 x 2"

Part Number: 420-HF45

45 deg 1/4 x 2 Carbide Engraving Bit This is a solid carbide single lip engraving tool with 45 degree included angle (22.5 degrees per side). Our 45 deg 1/4 x 2 engraving tool is a very popular choice for engraving small detail. It will cut a 45 degree angle into your material. *Remember to choose a cutting tip from the box below. The larger the tip size the stronger the tool will be. All of our half round engraving tools have a 1/2" split length. Included angle = 45 degrees Side angle = 22.5 degrees Shank Diameter = 1/4  (6.35mm) Tool Length =  2 in...

$16.00