Shopping Cart:0 items
Your cart is empty
MENU
Cad Cam Milling Tools
Miniature End Mills
Engraving Tools
Plotter Blades
Tapered Flat End Mill - 30 degree .005

Here is a 1/8 x 1-1/2" tapered flat end mill with a .005 inch cutting tip (0.127mm). This end mill has a 30 degree included angle, 15 degrees per side, with a .200 inch cut length (5.10mm).

Solid Carbide - Shank Diameter: 1/8  (3.175mm) - Tool Length: 1-1/2 inches (38mm)

 

*These tools are coated with a ALTiN like coating that is specially made for these tools, Its a very high quality coating that has out performed all other coatings we have tested.*

 

Tapered Flat End Mill - 30 degree .005

Part Number: TEF30-005

Here is a 1/8 x 1-1/2" tapered flat end mill with a .005 inch cutting tip (0.127mm). This end mill has a 30 degree included angle, 15 degrees per side, with a .200 inch cut length (5.10mm). Solid Carbide - Shank Diameter: 1/8  (3.175mm) - Tool Length: 1-1/2 inches (38mm)   *These tools are coated with a ALTiN like coating that is specially made for these tools, Its a very high quality coating that has out performed all other coatings we have tested.*  ...
$24.95