Shopping Cart:0 items
Your cart is empty
MENU
Cad Cam Milling Tools
Miniature End Mills
Engraving Tools
Plotter Blades
Tapered Ball End Mill - 6 degree .005

6 Degree Tapered Ball End Mill with .005 tip

This is a 3 degrees per side tapered ball solid carbide end mill. This carbide end mill has a .005 (0.127mm) ball nose cutting tip to give the finest detail possible.

These tools can cut very fine detail in wax, but it is very important to slow your travel speed to a minimum of 300 mm per minute and keep the plunge depth to 1mm (.040) or less.

This Tapered Ball End Mill Features

Cutting Tip - .005 inches (0.127mm) ball
Length of Cut - .350 inches (9.0mm)
Included angle - 6 degrees (3 degrees per side!)
Solid Carbide - Shank Diameter: 1/8  (3.175mm) -
Tool Length: 1-1/2 inches (38mm)

Tapered Ball End Mill - 6 degree .005

Part Number: TEB6-005

6 Degree Tapered Ball End Mill with .005 tip This is a 3 degrees per side tapered ball solid carbide end mill. This carbide end mill has a .005 (0.127mm) ball nose cutting tip to give the finest detail possible. These tools can cut very fine detail in wax, but it is very important to slow your travel speed to a minimum of 300 mm per minute and keep the plunge depth to 1mm (.040) or less. This Tapered Ball End Mill Features Cutting Tip - .005 inches (0.127mm) ball Length of Cut - .350 inches (9.0mm) Included angle - 6 degrees (3 degrees per side!) Solid Carbide - Shank Diameter:&...
$37.00