Shopping Cart: 35 Products
MENU
Cad Cam Milling Tools
Miniature End Mills
Engraving Tools
Plotter Blades
Engraving Tool 90 deg - 1/8 x 2\"
  • Engraving Tool 90 deg - 1/8 x 2"

Engraving Cutter 1/8 x 2 90° Inc Angle

1/8 x 2" half round carbide engraving cutter with a 90 degree included angle (45 degrees per side). This carbide engraving cutter is very popular for engraving brass, aluminum, and stainless steel.

Included angle = 90 degrees
Side angle = 45 degrees
Shank Diameter = 1/8  (3.175mm)
Tool Length =  2 inches  (50mm)
 

Remember to choose a tip size. The tip size will determine the line width when it comes into contact with the material you are engraving.

Engraving Tool 90 deg - 1/8 x 2"

Part Number: 820-HF90

Engraving Cutter 1/8 x 2 90° Inc Angle 1/8 x 2" half round carbide engraving cutter with a 90 degree included angle (45 degrees per side). This carbide engraving cutter is very popular for engraving brass, aluminum, and stainless steel. Included angle = 90 degrees Side angle = 45 degrees Shank Diameter = 1/8  (3.175mm) Tool Length =  2 inches  (50mm)   Remember to choose a tip size. The tip size will determine the line width when it comes into contact with the material you are engraving....

$12.50