Engraving Tool 80 deg 1/4 x 2"

Engraving Tool 80 deg 1/4 x 2"

Starting at: $18.50

Make Selection


Part#: 420-HF80

Product Details

All of our half round tools have a ½” split length. This is a Solid Carbide Single Lip Engraving Tool with 80 degree included angle (40 degrees per side) Very popular for engraving stainless steel,  brass and aluminum. *Remember to choose a cutting tip from the box below. The larger the tip size the stronger the tool will be.
Included angle = 80 degrees
Side angle = 40 degrees
Shank Diameter = 1/4  (6.35mm)
Tool Length =  2 inches  (50mm)

Copyright © 2020 Bits & Bits.