Shopping Cart: 1 Product
MENU
Cad Cam Milling Tools
Miniature End Mills
Engraving Tools
Plotter Blades
Engraving Tool 60 deg 1/4 x 2\"

Engraving Tool With 60 deg Included Angle

This is a solid carbide single lip engraving tool with 60 degree included angle (30 degrees per side). This type of engraving tool is very popular for engraving most plastics.

The Photo above shows a 60°inc angle

All of our half round engraving tools have a 1/2" split length. *Remember to choose a cutting tip from the box below.

Included angle = 60 degrees
Side angle = 30 degrees
Shank Diameter = 1/4  (6.35mm)
Tool Length =  2 inches  (50mm)

Engraving Tool 60 deg 1/4 x 2"

Part Number: 420-HF60

Engraving Tool With 60 deg Included Angle This is a solid carbide single lip engraving tool with 60 degree included angle (30 degrees per side). This type of engraving tool is very popular for engraving most plastics. The Photo above shows a 60°inc angle All of our half round engraving tools have a 1/2" split length. *Remember to choose a cutting tip from the box below. Included angle = 60 degrees Side angle = 30 degrees Shank Diameter = 1/4  (6.35mm) Tool Length =  2 inches  (50mm)...

Starting at: $16.00