Engraving Tool 60 deg 1/4 x 2"

Engraving Tool 60 deg 1/4 x 2"

Starting at: $16.50

Make Selection


Part#: 420-HF60

Product Details

Engraving Tool With 60 deg Included Angle

This is a solid carbide single end engraving tool with 60 degree included angle (30 degrees per side). This type of engraving tool is very popular for engraving on wood or plastic and even on metals.

The Photo above shows a 60°inc angle

All of our half round engraving tools have a 1/2" split length. *Remember to choose a cutting tip from the box below.

Included angle = 60 degrees
Side angle = 30 degrees
Shank Diameter = 1/4  (6.35mm)
Tool Length =  2 inches  (50mm)

Copyright © 2020 Bits & Bits.