Engraving Tool 90 deg - 1/8 x 1-1/2"

Engraving Tool 90 deg - 1/8 x 1-1/2"

$10.50

Make Selection

 

Part#: 815-HF90

Product Details

1/8 x 1-1/2" half round carbide engraving cutter with a 90 degree included angle (45 degrees per side). Remember to choose a tip size. The tip size will determine the line width when it comes into contact with the material you are engraving. Very popular for engraving brass, aluminum, and stainless steel. For example when engraving 1/8" tall letters use a .010 or .015 tip, but for 1/4" tall letters use a .020 or .030 tip.

Included angle = 90 degrees
Side angle = 45 degrees
Shank Diameter = 1/8  (3.175mm)
Tool Length =  1-1/2  (38mm)

Copyright © 2018 Bits & Bits.