Tapered Ball End Mill - 6 degree .005

Tapered Ball End Mill - 6 degree .005

$37.00


Part#: TEB6-005

Product Details

6 Degree Tapered Ball End Mill with .005 tip

This is a 3 degrees per side tapered ball solid carbide end mill. This carbide end mill has a .005 (0.127mm) ball nose cutting tip to give the finest detail possible.

These tools can cut very fine detail in wax, but it is very important to slow your travel speed to a minimum of 300 mm per minute and keep the plunge depth to 1mm (.040) or less.

This Tapered Ball End Mill Features

Cutting Tip - .005 inches (0.127mm) ball
Length of Cut - .350 inches (9.0mm)
Included angle - 6 degrees (3 degrees per side!)
Solid Carbide - Shank Diameter: 1/8  (3.175mm) -
Tool Length: 1-1/2 inches (38mm)

Copyright © 2018 Bits & Bits.