Tapered Flat End Mill - 30 degree .005

Tapered Flat End Mill - 30 degree .005


Part#: TEF30-005

Product Details

Here is a 1/8 x 1-1/2" tapered flat end mill with a .005 inch cutting tip (0.127mm). This end mill has a 30 degree included angle, 15 degrees per side, with a .200 inch cut length (5.10mm).

Solid Carbide - Shank Diameter: 1/8  (3.175mm) - Tool Length: 1-1/2 inches (38mm)


*These tools are coated with a ALTiN like coating that is specially made for these tools, Its a very high quality coating that has out performed all other coatings we have tested.*


Copyright © 2019 Bits & Bits.