Engraving Tool 45 deg 1/4 x 2"

Engraving Tool 45 deg 1/4 x 2"

Starting at: $16.50

Make Selection

 
 

Part#: 420-HF45

Product Details

45 deg 1/4 x 2 Carbide Engraving Bit

This is a solid carbide single end engraving tool with 45 degree included angle (22.5 degrees per side). Our 45 deg 1/4 x 2 engraving tool is a very popular choice for engraving small detail on wood or plastic and even lightly on metals. It will cut a 45 degree angle into your material. *Remember to choose a cutting tip from the box below.

The larger the tip size the stronger the tool will be. All of our half round engraving tools have a 1/2" split length.

Included angle = 45 degrees
Side angle = 22.5 degrees
Shank Diameter = 1/4  (6.35mm)
Tool Length =  2 inches  (50mm)
Copyright © 2018 Bits & Bits.