70 Degree Carbide Engraving Tool - 1/4 x 2
All of our half round engraving tools have a ½” split length.
This is a solid carbide single lip engraving tool with 70 degree included angle (35 degrees per side). Very popular for engraving most plastics, brass and aluminum.
*Remember to choose a cutting tip from the box below. The larger the tip size the stronger the tool will be.
Included angle = 70 degrees
Side angle = 35 degrees
Shank Diameter = 1/4 (6.35mm)
Tool Length = 2 inches (50mm)