Engraving Cutter 1/8 x 2 90° Inc Angle
1/8 x 2" half round carbide engraving cutter with a 90 degree included angle (45 degrees per side). This carbide engraving cutter is very popular for engraving brass, aluminum, and stainless steel.
Included angle = 90 degrees
Side angle = 45 degrees
Shank Diameter = 1/8 (3.175mm)
Tool Length = 2 inches (50mm)
Remember to choose a tip size. The tip size will determine the line width when it comes into contact with the material you are engraving.