Engraving Tool 90 deg - 1/8 x 2"

Engraving Tool 90 deg - 1/8 x 2"

$13.50

Make Selection

 

Part#: 820-HF90

Product Details

Engraving Cutter 1/8 x 2 90° Inc Angle

1/8 x 2" half round carbide engraving cutter with a 90 degree included angle (45 degrees per side). This carbide engraving cutter is very popular for engraving brass, aluminum, and stainless steel. We recomend shallow cuts in all metals, this will help prevent the tool from chipping. 

Included angle = 90 degrees
Side angle = 45 degrees
Shank Diameter = 1/8  (3.175mm)
Tool Length =  2 inches  (50mm)
 

Remember to choose a tip size. The tip size will determine the line width when it comes into contact with the material you are engraving.

Copyright © 2018 Bits & Bits.