DC062F Deep Cut Long Reach 2FL SQ .062 - w/1/2 LOC & 3/4 Reach

DC062F Deep Cut Long Reach 2FL SQ .062 - w/1/2 LOC & 3/4 Reach

$26.50


Part#: DC062F

Product Details

1/16 (.062) Solid Carbide 2 Flute Flat End Mill with a 1/2 length of cut and 3/4 total length of reach!  

The Super Long Reach End Mill tools have an even longer reach for the really hard to reach areas. They have standard flute lengths with a relief grind after the flutes to allow you to continue your cut or plunge without hitting the shaft of the tool on the wall of the part or mold. These tools are coated with a proprietary high performance *Astra coating* that allows higher speed & feed rates as well as extended tool life & increased lubricity in abrasive material.

Shank Diameter: 1/8  (3.175mm)

Tool Length: 2 inches (51mm) 
 
This data serves as a general guidance only.
Soft/Hard Woods/ MDF - Spindle Speed- RPM: 16-18K  - Feed Rate - IPM : 60-80" 
Plastics / Aluminum - Spindle Speed- RPM: 16-18K  - Feed Rate - IPM : 40-60" 
Max Cut depth per pass 1/16"
Copyright © 2019 Bits & Bits.