Your cart is empty
Surplus Specials
This is where we list over runs, special tools that have been discontinued and tools with blemishes but still cut clean.
These overstock cutting tools are in limited supply, and they may not always be available.
-
2 Flute SQ .093 End mill
1/8 x 2” Solid Carbide Flat End Mill .093 (7.6mm cut length) These end-mills are brand new and are overruns from a custom order Shank Diameter: 1/8 (3.175mm) - Tool Length: 2 inches (50mm) Tip Size Inches: .093 Tip Size MM: 2.36 Length of Cut/Inches: .300 Length of Cut/MM: 7.6 1/8 x 2” Solid Carbide Flat End Mill .093 (7.6mm cut length) These end-mi... -
2 Flute Ball .093 End Mill
1/8 x 2” Solid Carbide Ball End Mill .093 (7.6mm cut length) These end-mills are brand new and are overruns from a custom order Shank Diameter: 1/8 (3.175mm) - Tool Length: 2 inches (50mm) Tip Size Inches: .093 Tip Size MM: 2.36 Length of Cut/Inches: .300 Length of Cut/MM: 7.6 1/8 x 2” Solid Carbide Ball End Mill .093 (7.6mm cut length) These e... -
6mm x 50mm 4 Flute End Mill 2mm
Shank Diameter = 6mm - Tool Length = 50mm Solid Carbide 4 flute 2.0mm Square End Mill with 6.35mm length of cut. Great for engraving or milling hard materials like stainless steel, metal, etc. These are overruns. Cutting Diameter - 2mm Shank Diameter = 6mm - Tool Length = 50mm Solid Carbide 4... -
2FL Stub Nose Ball .015 Brand New
These are overruns. Never used, coated with an ALTiN Coating to help prolong the tool life! Made in the USA. 1/8 - shank diameter 1-1/2" - overall length Tip Size Inches: .015 Tip Size MM: 0.38 Length of Cut/Inches: .0225 Length of Cut/MM:0.5715 These are overruns. Never used, coated with an ALTiN Coating to help prolo... -
2FL SQ .019 End Mill Brand New
These are new high quality premium tools that were part of a customers old stock. Never used, made in the USA with the finest micrograin carbide available. We promise that you will love these tools. 1/8 - shank diameter 1-1/2" - overall length .019 - square (flat) cutting tip .057" - flute length These are new high quality premium tools that were part of a customers old stoc... -
2.5mm Ball End Mill - 20mm Length of Reach
Brand New Tool - Never Used! - Customer Over-Run item - Made in USA Solid Carbide Shank Diameter = 4mm - Tool Length = 38mm Solid Carbide 2 flute 2.5mm Ball End Mill works well in all materials. great for deep plunging. The Ball design is great for smooth cutting and milling in all types of material including zirconia. This is a brand new tool. Made for a customer who no... Brand New Tool - Never Used! - Customer Over-Run item - Made in USA Solid... -
2.5mm Ball End Mill 3mm shank x 38mm long
Brand New tools. Made in USA. Coated with proprietory coating for long life. For milling zirconia, PMMA, and acrylics. Made for a customer who no longer uses this size. 3mm Shank x 38mm long x 2.5mm ball 20mm reach Brand New tools. Made in USA. Coated with proprietory coating for long life. Fo... -
1mm Ball End Mill 3mm Shank x 38mm long
Brand New tools. Made in USA. Coated with proprietory coating for long life. For milling zirconia, PMMA, and acrylics. Made for a customer who no longer uses this size. 100% Satisfaction Guarantee 3mm Shank x 38mm long x 1mm ball 15mm reach Brand New tools. Made in USA. Coated with proprietory coating for long life. Fo... -
0.7mm Ball End Mill 3mm Shank x 38mm Long
Brand New tools. Made in USA. Coated with proprietory coating for long life. For milling zirconia, PMMA, and acrylics. Made for a customer who no longer uses this size. 3mm Shank x 38mm long x 0.7mm ball 7.5mm reach Brand New tools. Made in USA. Coated with proprietory coating for long life. Fo... -
3FL End Mill Left Hand Spiral Right Hand Cut .109
Product Details: Cutting Diameter .109 (2.778mm) Flute Length: .400 (10.2mm) Overall Length: 1-1/2" Shank Diameter: 1/8" Cut & Flute: Right Hand Cut, Left Hand Spiral Helix: 30 degree Helix *These tools are coated with a ALTiN Coating* ALTIN is a high performance coating for milling, tapping and drilling in stainless steels, carbon steels, alloy steels, titanium and cast iron. This... Product Details: Cutting Diameter .109 (2.778mm) Flute Length: .400 (10.2mm) Ov... -
2mm Ball End Mill - Resharpened
This is a resharpened end mill that is perfect for cutting wax or any other soft material. Great for practice and roughing any type of material. 3mm shank x 1.5" long 2mm ball end cutting tip 1/2" length of reach This is a resharpened end mill that is perfect for cutting wax or any other sof... -
1.5mm Ball - with 16mm Reach
This is brand new, not used or blemished. It can cut all types of material, including zirconia and wax. Great for reaching into deep areas Metric - 3mm x 1-1/2” Solid Carbide Tip Size Inches: .059 Tip Size MM: 1.50 Flute Length Inches: .0795 Flute Length MM: 2 Length of Reach Inches: .6300 Length of Reach MM: 16mm This is brand new, not used or blemished. It can cut all types of materia... -
Diamond Engraver 3 for $5.25 - Used
These are 120 degree diamond engraving tools. They can scratch engrave brass, aluminum and metal. These are the tools that trophy makers used to engrave with. Use them in your mill or Dremel. You get (3) for $5.50 - These are used tools NOT new These are 120 degree diamond engraving tools. They can scratch engrave brass, a...