Your cart is empty
1/4 x 7" Cutters
These are for top loading engraving machines where the cutter screws into the spindle from the top. Price includes cutter knob.
-
Half Round 1/4 x 7"
Solid micrograin carbide - Shank Diameter = 1/4 (6.35mm) - Tool Length = 7 inches (177mm) The 'Half-Round' is our most popular cutter. Use it for engraving plastic, brass & aluminum, metal or stainless. All tip sizes available. These tools come with a cutter knob. Industry standards recommend that you use: 80 degree included for engraving stainless and most... Solid micrograin carbide - Shank Diameter = 1/4 (6.35mm) - Tool Length =&... -
Profiler Cutter 1/4 x 7 - 30 degree
Solid micrograin carbide - Shank Diameter = 1/4 (6.35mm) - Tool Length = 7 inches (177mm) The 'Profiler' has a sharp angle that works well for doing cut-outs. Very popular for engraving letters that run close together. Cuts a slight 'V' groove. Can also be used for ADA. All tip sizes available. These tools come with a cutter knob. Solid micrograin carbide - Shank Diameter = 1/4 (6.35mm) - Tool Length =&... -
QTR Round 1/4 x 7"
Solid micrograin carbide - Shank Diameter = 1/4 (6.35mm) - Tool Length = 7 inches (177mm) The 'Quarter-Round' is designed for better chip removal. It works well on stainless, acrylic, profiling soft material and to cut out ADA applique. These tools come with a cutter knob. Industry standards recommend that you use: 80 degree included for engraving stainless and... Solid micrograin carbide - Shank Diameter = 1/4 (6.35mm) - Tool Length =&... -
Parallel Cutter 1/4 x 7"
Solid micrograin carbide - Shank Diameter = 1/4 (6.35mm) - Tool Length = 7 inches (177mm) The 'Parallel' cuts with a straight edge. The sides of th groove will be parallel, unlike the half-round which cuts a 'V' groove. Tip size standard to .060 (smaller tips upon request). These tools come with a cutter knob. $5.00 more for tips smaller than .060. We do not... Solid micrograin carbide - Shank Diameter = 1/4 (6.35mm) - Tool Length =&... -
Cutter/Beveler 1/4 x 7"
1/4 x 7 Beveled Engraving Cutter Made of solid micrograin carbide, the 'Cutter/Beveler' is two engraving tools in one. The end has a .060 parallel to cut through the material and the angle produces a 45 degree beveled angle. Please specify 1/8 or 1/16 material. These tools come with a cutter knob. Shank Diameter = 1/4 (6.35mm) Tool Length = 7 inches (177mm) 1/4 x 7 Beveled Engraving Cutter Made of solid micrograin carbide, the 'Cutt... -
Beveler 1/4 x 7 x 90°
Solid micrograin carbide - Shank Diameter = 1/4 (6.35mm) - Tool Length = 7 inches (177mm) The 'Beveler' or border cutter is used to cut a shape on the edge of your material. The standard angle is 90 degree included (side angle is 45 degree). You can order any angle at no extra charge. These tools come with a cutter knob. Solid micrograin carbide - Shank Diameter = 1/4 (6.35mm) - Tool Length =&... -
Carbide Burnisher 1/4 x 7"
Solid micrograin carbide - Shank Diameter = 1/4 (6.35mm) - Tool Length = 7 inches (177mm) The 'Burnisher' is used on coated metals to remove the lacquer and bring out the 'undershine'. All tip sizes available. These tools come with a cutter knob. Solid micrograin carbide - Shank Diameter = 1/4 (6.35mm) - Tool Length =&...