1/4 x 7" Cutters

For top loading engraving machines where the brass engraving cutter knob screws into the top of the spindle.


Product Image Item Name- Price
Half Round 1/4 x 7"

Half Round 1/4 x 7"

Solid micrograin carbide - Shank Diameter = 1/4  (6.35mm) - Tool Length =  7 inches  (177mm) The 'Half-Round' is our most...
$24.45

... more info

Profiler Cutter 1/4 x 7 - 30 degree

Profiler Cutter 1/4 x 7 - 30 degree

Solid micrograin carbide - Shank Diameter = 1/4  (6.35mm) - Tool Length =  7 inches  (177mm) The 'Profiler' has a sharp...
$26.50

... more info

QTR Round 1/4 x 7"

QTR Round 1/4 x 7"

Solid micrograin carbide - Shank Diameter = 1/4  (6.35mm) - Tool Length =  7 inches  (177mm) The 'Quarter-Round' is...
$28.45

... more info

Parallel Cutter 1/4 x 7"

Parallel Cutter 1/4 x 7"

Solid micrograin carbide - Shank Diameter = 1/4  (6.35mm) - Tool Length =  7 inches  (177mm) The 'Parallel' cuts with a...
$24.45

... more info

Cutter/Beveler 1/4 x 7"

Cutter/Beveler 1/4 x 7"

1/4 x 7 Beveled Engraving Cutter Made of solid micrograin carbide, the 'Cutter/Beveler' is two engraving tools in one. The end has a .060...
$31.00

... more info

Beveler 1/4 x 7 x 90°

Beveler 1/4 x 7 x 90°

Solid micrograin carbide - Shank Diameter = 1/4  (6.35mm) - Tool Length =  7 inches  (177mm) The 'Beveler' or border...
$24.45

... more info

Carbide Burnisher 1/4 x 7"

Carbide Burnisher 1/4 x 7"

Solid micrograin carbide - Shank Diameter = 1/4  (6.35mm) - Tool Length =  7 inches  (177mm) The 'Burnisher' is used on...
$26.50

... more info

Copyright © 2018 Bits & Bits.