Shopping Cart:0 items
Your cart is empty
MENU
Cad Cam Milling Tools
Miniature End Mills
Engraving Tools
Plotter Blades

1/8 x 1-1/2" Cutters

All of Bits & Bits engraving tools are solid micrograin carbide. For most metals, industry standards call for using a wider angle (80inc or 90inc) to give the tool strength. For softer materials like plastic, acrylic, wood, etc, the 50inc or 60inc half round is the most popular. Please specify a tip size when ordering. The Included angle is always 2x's the side angle

Tip sizes start at .003, .005 and up. The tip size will determine how wide your line is. For small character engraving choose a smaller tip size. For example when engraving 1/8" tall letters use a .010 or .015 tip, but for 1/4" tall letters use a .020 or .030 tip.

  • Engraving Tool 10 deg - 1/8 x 1-1/2
    Engraving Tool 10 deg - 1/8 x 1-1/2
    10 Degree Included Angle Engraving Tool for very fine engraving and milling in soft materials such as wax, butterboard and soft woods. Please note: this is a very fine cutting tool and can easily break if not used properly. We recommend very shallow cut depths starting at .002" deep per pass. 1/8 Shank x 1-1/2" Long 5 degree side angle  10 degree included angle 10 Degree Included Angle Engraving Tool for very fine engraving and milling in s...
  • Engraving Tool 15 deg - 1/8 x 1-1/2
    Engraving Tool 15 deg - 1/8 x 1-1/2
    Solid Carbide -15 Degree included angle engraving tool for engraving and milling fine detail in soft materials such as wax, butterboard and soft woods.. This is a very delicate tool and can break if not used properly. Make sure to make very shallow cuts (.002 to .004 per pass) when using this tool. Made in USA by Bits & Bits Company. 1/8 Shank x 1-1/2" Long 15 degree included angle... Solid Carbide -15 Degree included angle engraving tool for engraving and mi...
  • Engraving Tool 20 deg - 1/8 x 1-1/2
    Engraving Tool 20 deg - 1/8 x 1-1/2
    20 Degree included  solid carbide engraving tool for fine detail. Great for engraving fine detail in wood, wax or other soft material. 1/8 Shank x 1-1/2" long 20 Degree included angle 10 degree side angle 20 Degree included  solid carbide engraving tool for fine detail. Great for...
  • Engraving Tool 30 deg - 1/8 x 1-1/2"
    Engraving Tool 30 deg - 1/8 x 1-1/2"
    This engraving tool has a 30 degree angle that will allow you to engrave or mill deeper into your part or mold without losing too much detail. It has a single lip cutting edge that cuts very clean. This tool is a good choice when fine detail is needed. It works well in plastic and other soft materials. Solid Carbide made in USA by Bits & Bits Company. Please choose a tip size... This engraving tool has a 30 degree angle that will allow you to engra...
  • Engraving Tool 40 deg - 1/8 x 1-1/2"
    Engraving Tool 40 deg - 1/8 x 1-1/2"
    Works well for engraving in plastic, wood and other soft materials. Can also be used to cut-out plastic parts. Remember to choose a tip size from the drop down box. The larger the tip size the stronger the tool will be. Included angle = 40 degrees Side angle = 20 degrees Cut Length Inches = .1500 Cut Length MM = 4mm Shank Diameter = 1/8  (3.175mm) Tool Length =  1-1/2 ... Works well for engraving in plastic, wood and other soft materials. Can also be&...
  • Engraving Tool 45 deg - 1/8 x 1-1/2"
    Engraving Tool 45 deg - 1/8 x 1-1/2"
    Solid Carbide engraving tool. Works well for engraving in plastic, wood and other soft materials. Please choose a tip size from the drop down box. Included angle = 45 degrees Side angle = 22.5 degrees Cut Length Inches = .1500 Cut Length MM = 4mm Shank Diameter = 1/8  (3.175mm) Tool Length =  1-1/2  (38mm)     Solid Carbide engraving tool. Works well for engraving in plastic, wood and othe...
  • Engraving Tool 50 deg - 1/8 x 1-1/2"
    Engraving Tool 50 deg - 1/8 x 1-1/2"
    Solid carbide engraving cutter 1/8 x 1-1/2 with a 50 degree included angle (25 degrees per side). Great for engraving all types of plastics. Remember to choose a tip size. The tip size will determine how wide your line is, for small character engraving choose a smaller tip size. For example when engraving 1/8" tall letters use a .010 or .015 tip, but for 1/4" tall letters use a... Solid carbide engraving cutter 1/8 x 1-1/2 with a 50 degree included angle...
  • Engraving Tool 60 deg - 1/8 x 1-1/2"
    Engraving Tool 60 deg - 1/8 x 1-1/2"
    1/8 x 1-1/2" half round solid carbide engraving cutter with a 60 degree included angle (30 degrees per side). These tools are sometimes called V-Bits because they are shaped like the letter V. Great for engraving all types of plastics and most metals. For example when engraving 1/8" tall letters use a .010 or .015 tip, but for 1/4" tall letters use a .020 or .030 tip. ... 1/8 x 1-1/2" half round solid carbide engraving cutter with a 60 degr...
  • Engraving Tool 70 deg - 1/8 x 1-1/2"
    Engraving Tool 70 deg - 1/8 x 1-1/2"
    1/8 x 1-1/2" half round engraving cutter with a 70 degree included angle. Remember to choose a tip size. The tip size will determine the stroke width of the cutter. Great for engraving all types of plastics and metals. For example when engraving 1/8" tall letters use a .010 or .015 tip, but for 1/4" tall letters use a .020 or .030 tip. Included angle = 70 degrees Side angle... 1/8 x 1-1/2" half round engraving cutter with a 70 degree included an...
  • Engraving Tool 80 deg - 1/8 x 1-1/2"
    Engraving Tool 80 deg - 1/8 x 1-1/2"
    1/8 x 1-1/2" half round carbide engraving cutter with a 80 degree included angle (40 degrees per side). Remember to choose a tip size. The tip size will determine the line width when it comes into contact with the material you are engraving. Very popular for engraving brass, aluminum, and stainless steel. For example when engraving 1/8" tall letters use a .010 or .015 tip, but for... 1/8 x 1-1/2" half round carbide engraving cutter with a 80 degree included...
  • Engraving Tool 90 deg - 1/8 x 1-1/2"
    Engraving Tool 90 deg - 1/8 x 1-1/2"
    1/8 x 1-1/2" half round carbide engraving cutter with a 90 degree included angle (45 degrees per side). Remember to choose a tip size. The tip size will determine the line width when it comes into contact with the material you are engraving. Very popular for engraving brass, aluminum, and stainless steel. For example when engraving 1/8" tall letters use a .010 or .015 tip, but... 1/8 x 1-1/2" half round carbide engraving cutter with a 90 degre...
  • Engraving End Mill 30 deg - 2 flute .010
    Engraving End Mill 30 deg - 2 flute .010
    1/8 x 1-1/2" Engraving SQ End Mill with 2 flutes for engraving metal .010 tip This is a very strong tool, great for engraving hard materials such as stainless steel and metal. For best results make shallow passes and use air or flood coolant. 1/8 x 1-1/2" Engraving SQ End Mill with 2 flutes for engraving metal .010 ...