Shopping Cart:0 items
Your cart is empty
MENU
Cad Cam Milling Tools
Miniature End Mills
Engraving Tools
Plotter Blades

Profile Tools - Carbide

The Profile tool will allow you to ‘plunge’ deeper into your part or mold without losing too much detail. This solid micrograin carbide profile tool is a good choice when fine detail is needed, it has a single lip cutting edge that cuts very clean in wax and other soft materials. Please specify tip size when ordering. The included angle is always 2x's the side angle.

Tool Size 1/8 x 1-1/2" - Also available 1/8 x 2" - Solid Carbide

  • Profile Tool 10 degree 1/8" x 1-1/2"
    Profile Tool 10 degree 1/8" x 1-1/2"
    10 Degree Included Angle Profile Tool 1/8 x 1-1/2 This 10° (5 degrees per side) profile tool will allow you to "plunge" deeper into your part or mold without losing too much detail. This wax milling tool has a single lip cutting edge that cuts very clean soft materials. This mill is a good choice when fine detail is needed. Please specify your desired tip size when ordering.... 10 Degree Included Angle Profile Tool 1/8 x 1-1/2 This 10° (5 degrees ...
  • Profile Tool 12 degree 1/8" x 1-1/2"
    Profile Tool 12 degree 1/8" x 1-1/2"
    Included angle = 12 degrees   Side angle = 6 degrees Cut Length Inches = .350 Cut Length MM = 9 Shank Diameter 1/8  (3.175mm) Tool Length 1-1/2  (38mm) Please choose a tip size from the drop down box below. All tip sizes are in inches use the conversion chart on this page to see the size in millimeters.   Included angle = 12 degrees   Side angle = 6 degrees Cut Length Inches = ....
  • Profile Tool 15 degree 1/8" x 1-1/2"
    Profile Tool 15 degree 1/8" x 1-1/2"
    Included angle = 15 degrees Side angle = 7.5 degrees Cut Length Inches = .3900 Cut Length MM = 10 Shank Diameter 1/8  (3.175mm) Tool Length 1-1/2  (38mm) Please choose a tip size from the drop down box below. All tip sizes are in inches use the conversion chart on this page to see the size in millimeters. Included angle = 15 degrees Side angle = 7.5 degrees Cut Length Inches = .3900 ...
  • Profile Tool 20 degree 1/8" x 1-1/2"
    Profile Tool 20 degree 1/8" x 1-1/2"
    Included angle = 20 degrees Side angle = 10 degrees Cut Length Inches = .3300 Cut Length MM = 8.5 Shank Diameter 1/8  (3.175mm) Tool Length 1-1/2  (38mm) Please choose a tip size from the drop down box below. All tip sizes are in inches use the conversion chart on this page to see the size in millimeters. Included angle = 20 degrees Side angle = 10 degrees Cut Length Inches = .3300 C...
  • Profile Tool 30 degree 1/8" x 1-1/2"
    Profile Tool 30 degree 1/8" x 1-1/2"
    Profile tools will allow you to engrave or mill deeper into your part or mold without losing too much detail. It has a single lip cutting edge that cuts very clean.  This tool is a good choice when fine detail is needed. Please specify tip size when ordering. Included angle = 30 degrees   Side angle = 15 degrees Cut Length Inches = .2100 Cut Length MM = 5.5 Shank Diameter = 1/8 ... Profile tools will allow you to engrave or mill deeper into your part or mold wi...
  • Profile Tool 40 degree 1/8" x 1-1/2"
    Profile Tool 40 degree 1/8" x 1-1/2"
    Included angle = 40 degrees Side angle = 20 degrees Cut Length Inches = .1500 Cut Length MM = 4 Shank Diameter = 1/8  (3.175mm) Tool Length =  1-1/2  (38mm) Please choose a tip size from the drop down box below. All tip sizes are in inches use the conversion chart on this page to see the size in millimeters. Included angle = 40 degrees Side angle = 20 degrees Cut Length Inches = .1500 C...
  • Profile Tool 45 degree 1/8" x 1-1/2"
    Profile Tool 45 degree 1/8" x 1-1/2"
    45 degree V-Bit engraving cutter. 1/8 shank x 1.5" long. Side angle = 22.5 degree  45 degree included angle. Shank Diameter = 1/8  (3.175mm) Tool Length =  1-1/2  (38mm) Please choose a tip size from the drop down box below. All tip sizes are in inches use the conversion chart on this page to see the size in millimeters. 45 degree V-Bit engraving cutter. 1/8 shank x 1.5" long. Side angle = 22.5...
  • Profile Tool 12 degree 1/8" x 2"
    Profile Tool 12 degree 1/8" x 2"
    Our new 2" long Profile tool allows you to reach even deeper. Perfect for milling fine detail.  Side angle = 6 degrees Cut Length Inches = .350 Cut Length MM = 9 Please choose a tip size from the drop down box below. Our new 2" long Profile tool allows you to reach even deeper. Perfect for m...
  • Profile Tool 15 degree 1/8" x 2"
    Profile Tool 15 degree 1/8" x 2"
    Included angle = 15 degrees Side angle = 7.5 degrees Cut Length Inches = .3900 Cut Length MM = 10 Shank Diameter = 1/8  (3.175mm) Tool Length =  2  (50mm) Please choose a tip size from the drop down box below. All tip sizes are in inches use the conversion chart on this page to see the size in millimeters. Included angle = 15 degrees Side angle = 7.5 degrees Cut Length Inches = .3900 ...
  • Profile Tool 20 degree 1/8" x 2"
    Profile Tool 20 degree 1/8" x 2"
    Included angle = 20 degrees Side angle = 10 degrees Cut Length Inches = .3300 Cut Length MM = 8.5 Shank Diameter = 1/8  (3.175mm) Tool Length =  2  (50mm)   Please choose a tip size from the drop down box below. All tip sizes are in inches use the conversion chart on this page to see the size in millimeters. Included angle = 20 degrees Side angle = 10 degrees Cut Length Inches = .3300 C...
  • Profile Tool 30 degree 1/8" x 2"
    Profile Tool 30 degree 1/8" x 2"
    Included angle = 30 degrees Side angle = 15 degrees Cut Length Inches = .2100 Cut Length MM = 5.5 Shank Diameter = 1/8  (3.175mm) Tool Length =  2  (50mm) Please choose a tip size from the drop down box below. All tip sizes are in inches use the conversion chart on this page to see the size in millimeters. Included angle = 30 degrees Side angle = 15 degrees Cut Length Inches = .2100 C...
  • Profile Tool 45 degree 1/8" x 2"
    Profile Tool 45 degree 1/8" x 2"
    45 degree V-Bit Engraving tool 1/8" x 2" for engraving and milling plastic, wood, acrylic, metal, etc. Side angle = 22.5 degrees 45 degree included angle Shank Diameter = 1/8  (3.175mm) Tool Length =  2  (50mm) Please choose a tip size from the drop down box below. All tip sizes are in inches use the conversion chart on this page to see the size in millimeters. 45 degree V-Bit Engraving tool 1/8" x 2" for engraving and milling pl...