Shopping Cart:0 items
Your cart is empty
MENU
Cad Cam Milling Tools
Miniature End Mills
Engraving Tools
Plotter Blades

11/64 x 6-1/2" Cutters

11/64 x 6-1/2 Top Loading Engraving Tools

These are for top loading engraving machines where the cutter screws into the spindle of the engraving machine.It is important that you choose a tip size when ordering your engraving tools. The taller the letters or characters the larger the tip size of the cutter should be. For example; for 1/4" tall letters you should use a .020 or .030 tip but for 1/8" tall letters a .010 or .015 tip would be better. All of our top loading tools come with a brass knob.

  • Cutter Knob Wrench
    Cutter Knob Wrench
    The cutter knob wrench is for the set screw in the brass knob that is on the top loading engraving cutter. The set screws have a 4 spline head and need a special wrench to tighten or loosen. The cutter knob wrench is for the set screw in the brass knob that is on the to...
  • Half Rnd Engraver 11/64 x 6-1/2
    Half Rnd Engraver 11/64 x 6-1/2
    Half Round Engraving Tool Solid micrograin carbide - Shank Diameter = 11/64  (4.36mm)  -  Tool Length =  6-1/2 inches  (165mm) The 'Half-Round' is our most popular engraving cutter. Use it for engraving plastic, brass and even aluminum, metal or stainless. All tip sizes are available. These tools come with a cutter knob Industry standards recommend that you... Half Round Engraving Tool Solid micrograin carbide - Shank Diameter = 11/64 ...
  • Profiler Cutter - 11/64 x 6-1/2 x 30 degree
    Profiler Cutter - 11/64 x 6-1/2 x 30 degree
    11/64 x 6-1/2 Carbide Profile Cutter - Solid micrograin carbide The 'Profiler' has a sharp angle that works well for doing cut-outs. This engraving tool is very popular for engraving letters that run close together. The Profiler cuts a slight 'V' groove, and can also be used for ADA.  These tools come with a cutter knob. Shank Diameter = 11/64  (4.36mm) Tool Length... 11/64 x 6-1/2 Carbide Profile Cutter - Solid micrograin carbide The 'Profile...
  • Quarter Round Cutter 11/64 x 6-1/2
    Quarter Round Cutter 11/64 x 6-1/2
    Shank Diameter = 11/64  (4.36mm) - Tool Length =  6-1/2 inches  (165mm) The 'Quarter-Round' is designed for better chip removal. It works well on stainless, acrylic, profiling soft material and to cut out ADA applique. These tools come with a cutter knob. Industry standards recommend that you use: 80° included for engraving stainless and most metals. 60°... Shank Diameter = 11/64  (4.36mm) - Tool Length =  6-1/2 inches&n...
  • Parallel 11/64 x 6-1/2
    Parallel 11/64 x 6-1/2
    Solid micrograin carbide - Shank Diameter = 11/64  (4.36mm) - Tool Length =  6-1/2 inches  (165mm) The 'Parallel' cuts with a straight edge. The sides of th groove will be parallel, unlike the half-round which cuts a 'V' groove. Tip size standard to .060. These tools come with a cutter knob. $5.00 more for tips smaller than .060. We do not offer tip sizes... Solid micrograin carbide - Shank Diameter = 11/64  (4.36mm) - Tool Length ...
  • Cutter Beveler 11/64 x 6-1/2
    Cutter Beveler 11/64 x 6-1/2
    Solid micrograin carbide - Shank Diameter = 11/64  (4.36mm) - Tool Length =  6-1/2 inches  (165mm) The 'Cutter/Beveler' is two tools in one. The end has a .060 parallel to cut through the material and the angle produces a 45 degree beveled angle. Specify 1/8 or 1/16 material. Solid micrograin carbide - Shank Diameter = 11/64  (4.36mm) - Tool Length ...
  • Beveler 11/64 x 6-1/2 x 90°inc
    Beveler 11/64 x 6-1/2 x 90°inc
    Solid micrograin carbide - Shank Diameter = 11/64  (4.36mm) - Tool Length =  6-1/2 inches  (165mm) The 'Beveler' or border cutter is used to cut a shape on the edge of your material. The standard angle is 90 degree included (45 side degree) . You can order any angle at no extra charge. These tools come with a cutter knob. Solid micrograin carbide - Shank Diameter = 11/64  (4.36mm) - Tool Length ...
  • Carbide Burnisher 11/64 x 6-1/2
    Carbide Burnisher 11/64 x 6-1/2
    Solid micrograin carbide - Shank Diameter = 11/64  (4.36mm) - Tool Length =  6-1/2 inches  (165mm) The 'Burnisher' is used on coated metals to remove the lacquer and bring out the 'undershine'. All tip sizes available. These tools come with a cutter knob. Solid micrograin carbide - Shank Diameter = 11/64  (4.36mm) - Tool Length ...